Ibercisa has broken into the Norwegian market and it has done it with great success. After many years of intense commercial activity the company based in Vigo has managed to break into this competitive market signing three important contracts for the supply of naval and fishing machinery for the Companies Volstad, REM and Andenesfiske and therey establishing a new precedent.   Ibercisa has supplied this vessel with electrical split trawl winches with a drum capacity for 3,000 m Ø 34 mm or 3,400 m Ø 32 mm. and a nominal line pull from 49,5 t at 38 m/min. at first layer to 20,1 t at 93 m/min at 17 th layer. These trawl winches are driven by an ABB water cooler electric motor of 355 Kw - 600 r/m, 440 V – 50 Hz, controlled by frequency converter, mounted in vertical below deck.  They have hermetical and split gear box based on three steps of pinion / crown helical type, all of them working in permanent oil bath by immersion; and the fixed drumis especially reinforced with band brake differential type, hydraulically operated by means of a special cylinder with Belleville springs inside to brake with pressure loss. The supplies also includes: - Electrical gilson winches driven by 75 Kw - 1500 r/m, (S2 – 30’ service), 400 V – 50 Hz, IP-56, electric with a capacity for 125 m of rope of Ø 40 mm., 22,2 t al 19,5 m/min at first lay and achieves a 28,8 t nominal pull at 29,2 m/min on the first lay. - Electric sweepline winches driven by a 110 Kw -1,800 r/min electric motor, 400 V - 50 Hz, IP-56, S2-30’ service, with automatic electro-magnetic disc brake and encoder with a capacity of 1,100 m of wire Ø28 mm. and a nominal line pull of 20,3 t at 31 m/min on the first lay. - Electric net sounder winches driven by an electric motor of 55 kW at 1,500 r/m, 400 V - 50 Hz, with automatic brake, heating resistances, PT100 temperature sensors and encoder with a capacity for 4,000 m Ø11,3 m. These winches have a pull and speed of 5,7 t at 53 m/min on the first lay. - Electric auxiliary winches driven by a 7,5 Kw - 1,500 r/m electric motor, 400 V- 50 Hz with automatic electro-magnetic disc brake and including encoder. These winches have a drum capacity of 60 m Ø 12 mm. and a nominal line pull and speed on the first lay of 1,1 t at 36 m/min. - Electric net drums driven by an electric motor of 260 Kw at 1,500 r/m and 85 % gear box efficiency. Each drum has a net capacity for 13 m3 and a nominal line pull of 36,5 t at 37 m/min. - Electric net drum driven by a 30 Kw at 1,500 r/m electric motor with fail safe brake disc brake with a net capacity for 13 m3 and a nominal line pull of 6 t at 26 m/min. - Electric auxiliary winch driven by a 11 Kw at 1,500 r/m electric motor and a drum capacitity for 1,100 m of wire of O28 mm. and a nominal line pull of 2 t at 31 m/min. - Electric auxiliary winches driven by a 45 Kw at 1.500 r/m electric motor, drum capacity for 50 m Ø 10 mm and a nominal line pull of 7,8 t at 32 m/min - Coden winches driven by 75 Kw at 1,500 r/m with a drum capacity for 150 Ø 22 mm. and a nominal line pull of 12,1 t at 35,7 m/min. - Electric auxiliary windlass driven by an electric motor of 45 Kw at 1,000 r/m with a drum capacity for 2x 370 m Ø48 and 27,5 m chain Ø46 mm and a nominal line pull of 16,9 t at 12,7 m/min at first lay. Supply for REM bercisa has supplied this vessel with three electrical split trawl winches with a drum capacity for 3,000 m Ø 34 mm or 3,500 m Ø 32 mm. and a nominal line pull from 54,1 t at 34,6 m/min. at first layer to 22,1 t at 84,8 m/min at 17 th layer. These trawl winches are driven by an ABB water cooler electric motor of 355 Kw - 600 r/m, 690 V – 60 Hz, controlled by frequency converter, vertically mounted below deck. With the control by frecuency converter, pulls 30 % higher and maximum speeds 70 %-80 % higer than nominal can be obtained. The supplies also includes: - Three electrical gilson winches driven by 75 Kw - 1500 r/m, (S2 – 30’ service), 400 V – 50 Hz, IP-56, electric with a capacity for 125 m of rope of Ø 40 mm., 21,5 t al 20 m/min at first lay. - Eight electric sweepline winches driven by a 75 Kw -1,500 r/min electric motor, 400 V - 50 Hz, IP-56, S2-30’ electric motor with automatic electromagnetic brake and encoder. Electric net sounder winches driven by an electric motor of 55 kW at 1,500 r/m, 690 V - 50 Hz, with electromagnetic brake, heating resistances , PT100 temperature sensors and encoder with a capacity for 4,000 m Ø11,3 m. These winches have a pull and speed of 5,5 t at 55 m/min on the first lay. Three electric coden winches driven by 75 Kw at 1,500 r/m with a drum capacity for 150 Ø 22 mm. and a nominal line pull of 12,6 t at 32,6 m/min. Electric net drum with a net capacity for 19,6 m3 and a nominal line pull of 12,6 t at 45,3 m/min at first lay. Electric net drum with a net capacity for 26,8 m3 and a nominal line pull of 29,8 t at 45,3 m/min at first lay. - Electric auxiliary windlass driven by an electric motor of 45 Kw at 1,000 r/m with a drum capacity for 2x 370 m Ø48 and 27 m chain Ø46 mm and a nominal line pull of 23,2 t at 11,3 m/min at first lay. Electric capstan driven by a 21,5 kW - 1,500 rpm - 690 V - 60 Hz with electromagnetic disc brake and encoder. Two electric auxiliary winches driven by a 7,5 Kw - 1,800 r/m electric motor, 690 V- 60 Hz with automatic electromagnetic disc brake and encoder. These winches have a drum capacity of 50 m Ø 22 mm. and a nominal line pull and speed on the first lay of 12,7 t at 32,6 m/min Three electric auxiliary winches driven by a 7,5 Kw at 1,500 r/m electric motor and a drum capacity for 60 m of wire of Ø12 mm. and a nominal line pull of 1,1 t at 36,2 m/min. Supply for Andenesfiske Ibercisa has supplied this vessel with three electrical split trawl winches with a drum capacity for 3,000 m Ø 34 mm or 3,400 m Ø 32 mm. and a nominal line pull from 49,5 t at 37,8 m/min. at first layer to 20,2 t at 92,7 m/min at 17 th layer. These trawl winches are driven by an ABB water cooler electric motor of 360 Kw - 600 r/m, 440 V – 50 Hz, controlled by frequency converter. With the control by frecuency converter, pulls 30 % higher and maximum speeds 70 %-80 % higer than nominal can be obtained. The supplies also includes: Eight electric sweepline winches driven by a 75 Kw -1,500 r/min electric motor, 400 V - 50 Hz, IP-56, S2-30’ electric motor with brake and encoder. Electric net sounder winch driven by an electric motor of 55 kW at 1,500 r/m, 400 V - 50 Hz, with electromagnetic brake, heating resistances, PT100 temperature sensors and encoder with a capacity for 4,000 m Ø11,3 m. These winches have a pull and speed of 5,4 t at 56,5 m/min on the first lay. Three electrical gilson winches driven by 75 Kw - 1500 r/m 400 V – 50 Hz, IP-56, electric with a capacity for 125 m of rope of Ø 40 mm., 21,5 t al 20 m/min at first lay. Three electric coden winches driven by 75 Kw at 1,500 r/m with a drum capacity for 150 Ø 22 mm. and a nominal line pull of 12,9 t at 32,4 m/min. One winch will work as conded and one as outhaul. Two electric net drum with a net capacity for 13 m3 and a nominal line pull of 36,5 t at 37,0 m/min at first lay. Electric storage net drum driven by a 30 kW -  1500 r/m electric motor, 400 V - 50 Hz with fail safe disc brake with a net capacity for 13 m3 and a nominal line pull of 6,3 t at 25,8 m/min. Electric auxiliary windlass driven by an electric motor of 55 Kw at 1,000 r/m with a drum capacity for 150m Ø22mm and a nominal line pull of 21,2 t at 11,3 m/min at first lay. Electric capstan driven by a 21,5 kW - 1,500 rpm - 400 V - 50 Hz. Two electric auxiliary winches driven by a 45 Kw - 1,500 r/m electric motor, 400 V- 50 Hz with brake and encoder. These winches have a drum capacity of 50 m Ø 10 mm. and a nominal line pull and speed on the first lay of 7,8 t at 31,8 m/min Three electric auxiliary winches driven by a 7,5 Kw at 1,500 r/m electric motor, 400 V - 50 Hz with brake and encoder and a drum capacity for 60 m of Ø12 mm. and a nominal line pull of 1,1 t at 36,2 m/min.