Energy and Offshore Vessels
Technological solutions for the blue economy
Special technologies
– Anchor Handling Towing Winches
– Traction and Storage System
– Heavy Lift Winches DNV 2.22
– HPU DNV 2.7.1
– ROV LARS (Launch & Recovery System)
– Spooling Operations
– Anchor Windlasses & Mooring Winches
– Capstans
Features
Key features that a state-of-the-art machine must meet. Formats, technology, warranties, remote control, …
ROV LARS
Launch & Recovery Systems
AHC
Active Heave Compensation Winches
Regenerative control systems with energy storage
Solutions
Custom designs for offshore and energy vessels
Reliability is non-negotiable at sea. At Ibercisa, we develop cutting-edge technology for the Offshore and marine renewable energy sectors, where extreme conditions demand certified, high-performance equipment. Our in-house R&D capabilities allow us to manufacture anchoring, towing, and anchor-handling winches with remote support possibilities, ensuring continuous and safe operability in the world’s most demanding offshore platforms and support vessels.
Anchor Handling Towing Winches
IBERCISA AHT designs are based on industry concepts such as dynamic brakes and frequency-controlled drivelines.
Safety Features to meet the increasing demands of deep water operations, several features are incorporated to safeguard vessel and crew.
– Constant tension, preventing Overload rope tension.
– Emergency Release function.
– Safe Clutch to protect accidental overloads like slack wire in the system.
High-speed pay-out Saving valuable vessel time is achieved by high speed pay-out using the water-cooled clutch in dynamic brake mode.
Fuel efficient, environmentally friendly Considerable savings on fuel consumption using an electric drive system. With a 30% higher efficiency and use of regenerative energy, significant cost savings are made.
Ibercisa Automatic Spooling can be adapted to several diameters.
Pioneers in the use of permanent magnet motors.
Designed and certified according to DNV 2.22.
Remote assistance 24/365.
Tailor-made design adapted to the demands of each client. Ibercisa specialises in adapting the winch design to the vessel.
Traction and Storage System
IBERCISA designs and manufactures a variety of traction and storage packages up to 200 tons SWL.
– Constant tension, possibility of operating with more units (multipoint lift), auto level.
– Parabolic spooling (reduced spooling area).
– Compact design.
– Certified according to BV NR 595.
– Portable design according DNV 2.7.3.
– EPU´s included.
Heavy Lift Winches DNV 2.22
IBERCISA designs and manufactures a range of Heavy Lift Winches.
Drum winches are designed to be utilised for hoisting, deployment, mooring and general pulling applications.
– Up to 200 Tons SWL.
– Hydraulic or Electric drive.
– Multiple diameter spooling accepted.
– CE mark. Safe Area, Zone II and Zone I ATEX compliant units available.
– Designed and certified according to DNV 2.22.
– Designed and certified as a DNV 2.7.3 Portable Offshore Unit.
HPU DNV 2.7.1
IBERCISA designs and manufactures a range of HPUs adapted to different client requirements:
– Diesel or Electric.
– Open or closed loop hydraulic systems.
– Multiple circuits can be installed within single HPUs.
– Safe Area, Zone II (Diesel) and Zone I (Electric) ATEX compliant units available.
– Designed and certified according to DNV 2.7.1 Offshore Containers.
ROV Winches
IBERCISA MO-E/160/4000-34 Ultra-deepwater Workclass ROV Deployment System.
The Ibercisa MO-E/160/4000-34 mobile LARS offers best-in-class, ultra-deep water, harsh environment deployment of heavy Workclass ROV’s.
– Fully integrated 13.6t deployment system.
– Patented antifriction spooling system.
– Umbilical life extended.
– Designed for most heavy WROVs, TMS’ and toolskids.
– Ultra-deepwater operating capability.
– Rigorous FMEA during design process.
– Optimised, best-in-class umbilical handling.
– High-speed electric winch with active heave compensation.
– Ultra-compact configuration.
– DNV product certification.
– Gross weight ca. 30t.
– Optimised delivery-times (sub-12 weeks possible).
Spooling Operations
IBERCISA designs and manufactures equipment to facilitate the installation or removal of wire, rope or umbilicals from storage reels to winches.
-Constant back tension.
-Portable (certification optional).
-Up to 80 tons back tension.
Anchor Windlasses & Mooring
Ibercisa designs and manufactures anchor mooring winches of various shapes and sizes.
– Manual or hydraulic clutches.
– Manual, hydraulic or pneumatic brakes.
– Hydraulic or electric drive.
– Variable Constant Tension Options.
– Optional Stainless Steel Brake Drums.
– Warping Head/Capstan on side of drum.
– Chain diameters up to 120mm.
Capstans
Ibercisa designs and manufactures electric and hydraulic driven capstans for all work vessels.
IBERCISA Capstans winches include:
– Hydraulic or Electric drives.
– Torque limiter for safety.
– Remote or local operated.
Around the world
We are close to you, at your service to support you and ensure the success of your next project.
