NEWS

Hi-tech trawl equipment for the JSC Arkhangelsk Trawl Fleet’s Barents Sea

Ibercisa Deck Machinery was involved in the construction of the Barents Sea, with the key supply of 41 deck winches that will be repeated on three sister ships. A contract of some 2 million euro per vessel that created more than 26,000 hours of work. JSC Arkhangelsk Trawl Fleet chose to incorporate “next generation electronically driven machinery, with an AFE system, control systems and remote monitoring. It also has efficient energy control for regenerative cycles and consumption systems combined with Scantrol fishing control to maintain trawl net symmetry”, explains Roberto Rodríguez Orro, General Manager of Ibercisa Deck Machinery, to Industrias Pesqueras Spanish fishing magazine.

Ibercisa’s design, manufacture and supply of the deck machinery was based on the success of the Pechora, a Russian trawler constructed at Tersan. “We took the Norwegian project as a basis as well as the vessel Andenesfisk-1, on which the equipment of our Spanish colleagues was installed. We visited the Norwegian vessel five times and received very positive feedback about the work of the trawl package. That’s why we chose this manufacturer”, says Mr. Nikolay Nazarenko, Director of Development of UF North West Fishing Consortium, to Industrias Pesqueras.

The Barents Sea began the relationship with Vyborg and has allowed the Vigo firm to sign new contracts with Russian shipowners, specifically 4 longliners for Virma, two trawlers for Okeanrybfloat, two trawlers for Luntos and one for Pacific Fisheries. But the experience of Ibercisa Deck Machinery in the Russian market didn’t begin there; it already goes back several decades, with more than 100 Russian trawlers with Ibercisa winches on board. To get here it has been necessary “to earn their confidence, because Russian vessels don’t all operate the same way, and not all fishing grounds are the same.” According to Roberto Rodríguez, “these are vessels that spend almost the entire year fishing, with very intensive use, and they are relatively self- sufficient, which is why they value reliability so highly. Confidence and durability are key aspects”.

Another of the Vigo company’s strong points is its technical support. Ibercisa has a representative for the Russian market, but the distance between the fishing grounds is a challenge, even more so now in the context of the pandemic, in which you have to contend with border closures. The company also has technical support in Norway, where the Barents Sea calls in during its operations.

Ibercisa Deck Machinery supplied the Barents Sea with 3 electric split trawl winches; 2 electric trawl lane winches, 8 electric sweep line winches, 1 electric auxiliary winch, 2 electric cod end winches, 2 hydraulic out haul winches, 1 hydraulic capstan, 2 electric cargo winches, 2 electric topping winches, 2 electric slewing winches, 2 electric net drums, 1 electric anchor winch, 2 roller stoppers, one electric net sounder winch and 7 hydraulic auxiliary winches.

The Barents Sea will operate in the North Atlantic and in the Barents Sea, fishing cod and haddock, which they will process in the onboard plant that has various production options, including a filleting capacity of 40 tonnes a day, H&G and a freezing capacity of 100 tonnes a day. The fish meal plant can produce 60 tonnes a day and the canning sections up to 5000 tins of roe and fish oil. “Normally we are harvesting in Norwegian and Barents Sea including Norwegian economic zone, Svalbard zone, Russian economic zone.

The Barents Sea is designed for single or double trawl fishing, which gives fishing options for shrimp and bottom feeding fishing, as well as being able to change to pelagic trawling if necessary. Its daily fishing capacity is 160 tonnes. “Hi-tech trawl equipment; filleting line; cargo palletising system, floating frequency”, Nikolay Nazarenko mentions as the most notable technical advances of the Barents Sea.

*Extract from an article publish in Industrias Pesqueras. You can download the Special Issue here.

Ibercisa develops an advanced…

Ibercisa develops an advanced…

Vigo, October 2026. Ibercisa Deck Machinery, S.A. has carried out the project “Design of an advanced LARS for unmanned underwater vehicles”, funded by the Galician Institute for Economic Promotion (Instituto…

27 October 2026
The Future Visits Ibercisa

The Future Visits Ibercisa

A group of sixty students and four professors from the Technical University of Madrid visited the facilities of Ibercisa Deck Machinery in Vigo. During the visit, the students were able…

8 October 2026
General Shareholders’ Meeting

General Shareholders’ Meeting

The Directors of Ibercisa Deck Machinery, S.A., pursuant to the resolution adopted by the Board of Directors on 27 March 2026, called the Ordinary General Meeting of Shareholders of the…

21 May 2026
Carlos Barrosa

Carlos Barrosa, the new…

Carlos Barrosa is the new Head of Sales for Asia, the Pacific, and the Middle East. Barrosa rejoins Ibercisa Deck Machinery, where he previously worked until 2023. A highly knowledgeable…

15 January 2026
Ibercisa supports young musicians’…

Ibercisa supports young musicians’…

As part of our corporate social policy, we are proud to sponsor the XIV Edition of “Concurso de Corda Cidade de Vigo”, organized by the Galician Association of Corda Instruments…

3 December 2025
Award for Sustainable SME…

Award for Sustainable SME…

Ibercisa Deck Machinery has received the for Sustainable SME in the ninth edition of the Pontevedra SME of the Year Awards, granted by the Chamber of Commerce of Pontevedra, Vigo…

30 October 2025
New Tensioner-Stower Machine Developed…

New Tensioner-Stower Machine Developed…

Features and Competitive Advantages of the New Tensioner-Stower Machine Developed by IBERCISA Deck Machinery. IBERCISA Deck Machinery has completed the development of an innovative tensioner-stower machine, marking a significant milestone…

26 September 2025
Ibercisa Receives the Most…

Ibercisa Receives the Most…

Ibercisa Deck Machinery has been awarded the Most International Company prize at the second edition of the Banco Sabadell Company of the Year Awards, organized by Prensa Ibérica. The ceremony…

10 June 2025
Integrated Subsea Solutions

Integrated Subsea Solutions

The exploitation of non-living marine resources – such as minerals or energy – is a key growth sector within governments’ major commitment to the blue economy, which is steadily consolidating and evolving towards more sustainable practices.

3 June 2025
Visit of the Galician…

Visit of the Galician…

The Minister of Employment, Trade, and Emigration, José González, visited our facilities and highlighted the Xunta de Galicia’s commitment to retaining talent and promoting youth employment in the region to address challenges such as generational replacement and filling job vacancies. In this regard, he emphasized initiatives like the Investigo Program, which supports the hiring of people under 30 in the fields of research, technology, and innovation.

10 April 2025
Mercedes Olmedo, Director of…

Mercedes Olmedo, Director of…

Mercedes Olmedo is the new Director of Human Resources and Legal Counsel at Ibercisa Deck Machinery. The responsibilities related to personnel management had until now been handled by the Financial Director, Miguel Ángel Conde, to whom the company expresses its gratitude for his effort and dedication during the years he took on these duties.

14 October 2024